TVIP boxes, utilized for accessing IPTV content, bear a resemblance to MAG boxes but operate on distinct software. What is IPTV?
A recurring predicament with TVIP boxes is the malfunctioning of the remote control. Within this discourse, we shall guide you through rectifying an inactive TVIP remote control. How to setup IPTV on TVIP Box?
Before undertaking any troubleshooting, it is advisable to conduct a preliminary assessment to ascertain whether the issue stems from depleted batteries. Engage several buttons on the remote control and observe whether the red indicator light flashes.
Should the indicator fail to illuminate, the root cause is likely exhausted batteries. Replace the batteries accordingly. (Should the indicator persist in its inert state even after battery replacement, it is indicative of a defective remote control, necessitating procurement of a replacement.)
Conversely, if the indicator does flicker yet the remote control remains non-responsive, the issue pertains to the infrared (IR) component of the remote control. This dilemma can be addressed by executing the following procedures.
How to fix TVIP IR remote issue?
Step 1: Press “Setting” (left side of S.INFO) and “Recall” (left side of “0”) at the same time.
Step 2: Direct the remote towards the box, then press and sustain the “S.INFO” button for a duration of 10 seconds. This action will initiate the alteration of the IP remote code page. Following the lapse of 10 seconds, you will be notified with the message “IR remote code page has been modified.”
Now the TVIP remote control recovered!
Feel free to leave a comment if you require further assistance regarding the TVIP remote control.
